FRAMES*FRAMES*FRAMES*FRAMES
Our frame rails are made from
2x3x11ga. and 2x4x11ga. rectangular
steel tubing. We can bend from our
accumulated specs, or we can
bend from your specs. QUANTITY
DISCOUNTS available. Typical pricing
is as follows:
***AUTO WELD has full length "bumper
to bumper" (one piece) rails with an
average price as little as
($795 for 2x3...per pair) and ($825 for 2x4
per pair) in "parallel" fashion.
***
Custom bent full 2x4 "perimeter type" frame rails with an average price of
$975-$1550 per pair.
***
Prices may vary depending on the length,
how complicated and the number of bends
of the rails that are to be bent.
***
Rear 2x3 frame rails: typical 4-link
or ladderbar and OEM type,
start for as little as $282.95 pr.
***
Custom bent 2x3 rear rails start at $480 pr.
***
Custom bent 2x4 rear rails start at $580 pr.
***
All frame rails sold in pairs!
SHOW QUALITY BENDS...NO WRINKLES!
Call for best price.
***

***EXAMPLE OF SOME OF THE FRAME
RAILS WE MANUFACTURE***
***
*OTHERS AVAILABLE*



*CUSTOM PERIMETER FRAMES*
Made from mandrel bent 2x4 box steel
(above and below)

***
"FACTORY SHAPED"
**
REAR FRAME RAILS
Made from 2x3x11ga..
The good stuff!!
"PARALLEL TYPE"
**
"NO WRINKLES"
***
NOTE: mandrel bent rear "PROFILE"
rails incorporate some welded areas
to create the "profile effect"
like factory.
'70-'81 Camaro "PARALLEL" rails
are mandrel bent, but also have
a welded area. This typically
is done because of mating
two curves together.

**
PLEASE NOTE :
Our "Factory Shaped" frame rails
are used for narrowing you frame
for more tire room. Although they
can be used for a much
stronger custom replacement
rail...they are not OEM rust
replacement rails that have to be
spot welded into the vehicle. Some
fabrication is needed to install.
---------------------
***Please Note: All 2x3 "Factory
Shaped" frame rails are
"parallel" except where noted
as "profile".


New '61-'64 FALCON
"FRONT RAILS"
Factory Shaped
but,"Parallel".
2x3....... $282.95 pair








NEW '67-'74 A-BODY MOPAR
Long "parallel" FRONT
Frame Rails
2x3......$394.95 pair
**
"Extra long" to go back to
the rear rails or suspension
clip!








'79-'93 MUSTANG
Factory shaped but, "parallel"
2x3.......$322.95








'70-'81 CAMARO
Factory shaped, but "parallel"
2X3......$344.95 pr








'70-'81 CAMARO
Factory "PROFILE" shaped
2x3......$549.95
(shackle sleeves sold separately)
Shackle sleeves $15.00 pr







B-BODY MOPAR
Charger, Roadrunner,
Coronet, Satellite
2x3......$324.95 pr





'64-'70 Mustang
Factory shaped but
"parallel"
2x3......$292.95 pr




'63-'68 Ford Ranchero
"parallel only"
2x3.........$282.95 pr




'60-'69 FORD "FALCON"
"parallel only"
2x3.......$292.95 pr







'64 Ford Fairlane
"parallel only"
2x3........$292.95 pr




'40-'41 Willys
2x3.........$287.95 pr

A-BODY MOPAR
Duster, Dart &
Dart Sport
'67-'69 Cuda,
2x3.........$292.95 pr





'70-'74 E-BODY MOPAR
CUDA and CHALLENGER
Factory shaped but
"parallel".
2x3.......$282.95 pr





'78-'87 EL CAMINO
2x3.........$292.95




'78 to '87 GM
Monte Carlo, Malibu,
Regal, Cutlass
2x3.........$304.95 pr



'68-'72 GM
Chevelle, GTO,
Cutlass
2x3........$304.95 pr



'68-'78 Nova
"Factory shaped" but
lower in the rear to
better mate with lower
trunk floor.
"parallel only"
2x3......$292.95 pr

55-57 CHEVY Belair
2x3......$292.95 pr







'62-'67 NOVA
Factory shaped..
but "parallel"
2x3.......$304.95 pr






---------------------
'67-69 Camaro
"Factory shaped" but
lower in the rear for
better mating to lower
trunk floor.
"parallel only"
2x3.........$292.95




'67-'69 CAMARO
**
"OEM" Shaped...but "parallel"
2x3.......$292.95





'67-'69 CAMARO
OEM Shaped "PROFILE RAILS"






"PROFILE RAILS"
These rear rails are designed to replace
the original "OEM" units. Great for replacing
those rusted out units where you don't want to
change the location of the springs.
Rails are mandrel bent 2x3x11ga box steel
and are made into the stock profile shape.
Also included are the shackle sleeves already
installed.
**
67-69 CAMARO PROFILE RAILS...$599.00 pair
**
62-67 NOVA PROFILE RAILS....$599.00 pair



'62-'67 NOVA
"PROFILE RAILS"














***
Typical "Featherweight" Front
Frame Rail Shape
***
6" RISE SHOWN (top)
**
3" RISE SHOWN (bottom)
**
OTHER RISES AVAILABLE!!
**
Prices starting at $275 a pair
**
Extra "LONG" versions available.

FRONT FRAME RAILS
**
Made from 2x4x11ga box steel.
**
SHOWN WITH TYPICAL 6" RISE
**
Prices starting at $395 a pair




-----------------------
"DROPPED CROSSMEMBERS"
**
2 1/2" DROP...$72.95
**
3" DROP...$72.95
**
3 3/4" DROP...$84.95
**
4" DROP...$94.95
**
4 3/4" DROP...$104.95
***







***NEW***
From the experts at
AUTO WELD comes a NEW
concept in crossmembers.
"FLAT BENT 2X4 DROPPED
MEMBERS". Engineered
for greater ground
clearance. Comes in a
3" DROP configuration
**
Prices starting at $184.95
**
Other drops available!!



**4-LINK FRAME RAILS**

***4-LINK***
These rails are made from 2x4x11ga
for our 4-links. They are mandrel
bent and are very smooth, just like
our other frame rails. They are bent
similar in design as the 2x3 rails
for various applications.
**
Prices starting at $480 pr
CUSTOM...$640 PR



***"COMPETITION 4-LINK"***
**
These rails are made
from 2x3x11ga box steel
with very smooth bends.
**
Variations with some applications.
**
Prices starting at $304.95 a pair.



***"PRO-STREET"***
**Ultimate II 4-Link**
**
Made from 2x3x11ga box steel.
Variations with some applications.
Prices start at .....$304.95




***
LADDER BAR RAILS
Mandrel bent 2x3x11ga.
box steel using the
same "No-Wrinkle"
technology as with our
other rails.
**
1-piece...$294.95
2-peice...$306.95












**
2x4 Ladder Bar frame rails
with brackets attached,
ready for the 2x4 crossmember.
(shown below)
2x4 welded rails.....$567.00






CHEVY "S10" Pickup
2X4 REAR FRAME RAILS
**
Our "S10" rails are
bent in the same
shape as the originals.
They are also the rails
that we use on our fixture
welded rear clips for all
the S10 trucks.
At the LOW price of $445 pair




'63-'67 CORVETTE
Mandrel bent 2x4
frame rails for
narrowing the back
of the car.
2x4 C2.......$575.00pr





*****
"FULL LENGTH FRAME RAILS"
***
CLICK HERE!!!
for "FULL LENGTH"
frame rails.
***
Made from mandrel bent
2x4x11ga box steel.
**
(some examples shown below)



Typical Example of a '41 Willys
Full Frame Rail Shape





"Featherweight" Front and "Ladder
Bar" Rear Full Frame Rail





"Featherweight" Front and "4-Link"
Rear Full Frame Rail