|
|
CENTER SECTIONS-RACE SPOOLS-LOCKERS- PINION SUPPORTS-CASES-INSTALLATION- PINION YOKES & U-BOLTS-POSI REBUILDS- SPOOL BEARINGS-AND MORE!!!!
"DETROIT LOCKER" or "POSI" CENTER SECTIONS
Complete "Detroit Locker" or "Posi" (trac-lock) center section includes: Nodular Iron case, aluminum pinion support, street and strip gears, all new bearings, seals and gasket, "Detroit Locker" or "Posi" unit, and your choice of gear ratio! ** **Detroit Locker center section 28-35 spline (must specify) Part#1601.....$1740.00 ** **Posi(Trac-lock)center section 28 or 31 spline (must specify) Part#1600.....$1555.00
9" Ultra Duty. Includes: Massive nodular case, aluminum pinion support, bearings, full race spool, new yoke, and your choice of gear ratio.These center sections are needed for serious hi-horsepower cars and trucks. ** NODULAR CENTER SECTION Part#1602...$1289.00 ** ** PRO GEAR OPTION Part#1603...$255.00 (389 TO 486 RATIO) ** ** ALUMINUM CASE CENTER SECTION Part#1604...$1485.00
ULTRA DUTY SPOOLS--LIFETIME GUARANTEE!!! * 9" Ford Spool, 31 spline, part#1610...$205.00 ** * 9" Ford Spool, 33 spline, part#1611...$205.00 ** * 9" Ford spool, 35 spline, part#1612...$205.00 ** ** 9" Ford spool, 40 spline, part#1613...$205.00 ** * 12 bolt Chevy spool, 30 spline, part#1614...$205.00 ** * 12 bolt Chevy spool, 33 spline, part#1615...$205.00 ** * Dana spool, 35 spline, 4.56 & up, part#1616...$210.00 ** * Dana spool, 35 spline, 4.10 & down, part#1617...$210.00 ** * 8-3/4" Mopar spool, 30 spline, part#1618...$205.00 ** * 8-3/4" Mopar spool, 35 spline, part#1619...$205.00
These are bullet-proof posis for street cars that see some duty on the track. NOTE: For 35 spline, you have to use an aftermarket 9" Ford case! ** Detroit Locker, 31 spline Part#1620...$645.00 ** ** Detroit Locker, 35 spline Part#1621...$645.00
Aluminum pinion supports are used when you want maximum strength for pinion support. ** Standard pinion Part#1622...$125.00 ** ** Heavy Duty pinion (pro gear) Part#1623...$140.00
"ALUMINUM 9" FORD CASE" Features a MASSIVE heavy duty Aluminum 9" case with 3.25 bearing, and a through-bolt design and has ten (10)bolt holes for the Pinion Support. *** Part#1625...Aluminum 3.25 case...$525.00
Our Nodular Case is one massive center case, which is ideal for extreme duty on the track. Features the Nodular 9" case, steel caps, adjusters, and 3.250 bearing center. Part#1626...Nodular 3.25 case...$370.00
This installation kit includes: Shims, pinion bearings, crush sleeve , pinion nut and gasket, etc. Everything you need to install your new ring gear, even the tooth checking grease! Part#1630...INSTALLATION PACK (2.89) CASE 9" FORD...$110.00 *** Part#1631...INSTALLATION PACK (35 SPLINE) 9" FORD FOR ALUMINUM PINION SUPPORT...$149.00 *** Part#1632...INSTALLATION PACK FOR ( Pro Gear) FORD...$199.00 *** Part#1633..GASKET...$8.00 *** ***ADD FOR NASCAR PINION SPACER KIT..$25
THESE PINION YOKES ARE THE FORGED HEAVY DUTY RACE TYPE WITH U-BOLTS, (accepts the larger 1350 u-joint) ** * DANA 60 & 8-3/4" MOPAR 29 SPLINE Part#1640...$130.00 ** * 9" FORD, 28 SPLINE Part#1642...$130.00 ** * 9" FORD, 35 SPLINE Part#1643...$130.00
These high quality bearings can also be used to replace the stock bearings for any application. Each spool bearing set is: ** ONLY!...$35.00/PAIR CHOICES: * 9" FORD, 2.891 CASE Part#1690...$35.00 * 9" FORD, 3.062 CASE Part#1691...$35.00 * 9" FORD, 3.250 CASE Part#1692...$35.00 * 12 BOLT CHEVY Part#1693...$35.00 * DANA 60 Part#1694...$35.00 * 8-3/4 MOPAR Part#1695...$35.00
|
home | back to top
|