The SUPER STANG 9" features a 9" Ford
housing with fully adjustable links.
All links have right and left hand
threads, which makes changing pinion
angle and setting the preload a breeze.
Bottom links are now independent from
the coil springs (the way it should be!)
New bracketry makes it easy to change
the instant center of the suspension,
(just like its Drag 4-link counterpart.)
36 COMBINATIONS IN ALL!! No need to cut
up your Mustang to get a fully tunable
suspension. It's a bolt-in transplant with
the exception of reaming out the metric
holes in the body brackets to 5/8."
Stock springs are utilized along with the
stock shocks to make this a truly
economical setup.

Top links feature solid stainless steel/
urethane bushed adjusters, and bottom links
use rod ends-standard! This baby hooks!!!
Added benefit: car will feel firmer when
going around corners.








STANDARD PACKAGE INCLUDES: A
NEW more massive and thicker aftermarket
jig welded 9" Ford housing, the
stronger 3 1/4" x 1/4" wall DOM
steel axle tubes, 4-link
control arms with all hardware
including rod ends, adjusters,
spacers, and bolts.
(COMPLETELY COMPLETE!!)

PREMIUM PACKAGE INCLUDES: Std.
Package plus Moser racing axles,
brgs-studs-ret. pkg.
(SAVE compared to
purchasing separately!!!)








***
(ABOVE)
Standard jig welded housing shown
***
(BELOW)
STANDARD SS9 PACKAGE
Standard jig welded housing,
links, rod ends, bolts and spacers.
Part#1400.......$1234.00
(as shown)
***



THIS IS THE ONE SOME OF THE FASTER
"SHOOT OUT" CARS HAVE BEEN USING!








***
(ABOVE)
THESE ARE EXTRA VIEWS OF OUR
CHAMPIONSHIP WINNING "SUPER STANG 9"
AS IT WAS BEING PREPPED FOR
"MUSCLE MUSTANG AND FAST FORD"
MAGAZINE.
***
(BELOW)
SS9 HOUSING SHOWN WITH
HOUSING BRACE, FILL & DRAIN,
WHEELIE BAR, ANTI-ROLL BAR,
AND COILOVER OPTION.
***
THIS REAR PACKAGE HAS BEEN
FEATURED IN OTHER LEADING
PUBLICATIONS AS WELL.

SUPER STANG PUTS ALL OTHER BOLT-IN SYTEMS TO SHAME!!
***
MUST SPECIFY YEAR!!
**

** 79-98 Mustang Standard Pkg
Part#1400.......$1234.00
**
** 79-98 Mustang Premium Pkg
Part#1401.......$1644.00
**
** 99-04 Mustang, mid 80s
Thunderbird Standard Pkg
Part#1403.......$1234.00
**
** 99-04 Mustang, mid 80s
Thunderbird Premium Pkg
Part#1404.......$1644.00
**
** Back brace option
Part#1030B.......$125.00
**
** Drain and fill option
Part#1005.......$68.00
**
** Upper link chromoly rod
end upgrade $58
**
**1 1/4" chromoly 4-link tube
upgrade............$105.00
**
**1 3/8" chromoly 4-link
option available for
BIG horsepower cars



!! COILOVER VERSIONS ARE AVAILABLE
UPON REQUEST. GIVE US A CALL!!!

"ANTI-ROLL BAR/COILOVER COMBO"
For more information......
(CLICK HERE)!!

Designed after the Super Stang 9", the Super
Stang 8.8 is easy to install and is believed
to be the best hooking bolt-in suspension
anywhere! It is fully adjustable for pinion
angle, preload, and instant center. Where other
manufacturers lack..the Super Stang excels!!!

As with the Super Stang 9", the lower control
arm is isolated from the coil spring mount as
it should be for better traction and handling.
Also, by doing this, it allows the lower
control arms to be fully adjustable for instant
center without changing ride height. The Super
Stang 8.8 is offered in two versions. Either a
control arm kit with brackets and hardware
included or a complete suspension kit including
top contol arms, lower control arms, and bracket
kit. (housing not included although shown
in the picture!)

THIS KIT WILL WORK IN MUSTANGS 79-99,
MID 80S THUNDERBIRDS, FAIRMONTS,
KIT CARS, STREET RODS,
AND ANYTHING THAT USES AN 8.8.
****
Many have been used in the
earlier "FACTORY 5"
Cobra kit cars to correct "wheel hop".

** TOP CONTROL ARM KIT
Part#1450M.......$267.95
**Above but for "Cobra" kit car
Part#1450C......$267.95
**
** LOWER CONTROL ARM KIT
Part#1451.......$308.95
**
** COMPLETE PKG (upper & lower)
Part#1452.......$525.95
(discounted)
**

!!! 7.5 SUPER STANG ALSO AVAILABLE
UPON YOUR REQUEST !!!

Top Control Arm Kit
(housing not included)






Complete Package
(housing not included)






INSTALLATION PROCEDURES:

1.) Grind bolt clearance on bottom
brackets as shown below.

2.) Bolt brackets to housing.

3.) Weld brackets to housing-(recommended)

4.) Drill metric size holes out to 5/8"
in each of the control arm brackets
under the floor.

5.) Bolt into car.

ALL OF OUR HOUSINGS ARE BUILT
IN PRECISE WELDING JIGS FOR
PERFECT ALIGNMENT. THEY FEATURE:
A NEW MASSIVE AND THICKER CORE WITH
THE STONGER 3 1/4" X 1/4" THICK
DOM STEEL AXLE TUBES, NEW HEAVY
DUTY URETHANE BUSHINGS
ARE INCLUDED ON TOP. YOU CAN
PURCHASE EITHER THE HOUSING
ONLY OR A HOUSING !PLUS! MOSER
AXLES AND A BEARING-
STUD-RETAINER PKG.




****
79-97 MUSTANG
**

** HOUSING ONLY
Part#1460...$739.95
**
** HOUSING, MOSER AXLES,
BRNG-STUD-RET. PKG
Part#1461...$1169.95
**





***
98 & 2004 MUSTANG AND THUNDERBIRDS
**

** HOUSING ONLY
Part#1462...$739.95
**
** HOUSING, MOSER AXLES,
BRNG-STUDS-RET PKG
Part#1463...$1169.95

THESE REAR CONTROL ARMS
ARE USED WHEN ADJUSTING
PINION AND CHASSIS
PRELOAD. COMES COMPLETE
WITH ALL NECESSARY
HARDWARE.
!!BUY ADJUSTABLE CONTROL ARMS
FOR THE SAME PRICE AS
NON-ADJUSTABLE!!




** UPPER REAR CONTROL ARMS
Part#1465...$185.95
(left picture)
**

** LOWER CONTROL ARMS
Part#1466...$257.95
**
** UPPER & LOWER CONTROL ARM PKG
Part#1467...$422.95
(right picture)
**

GM HI-TRAC 9
HOOK IT!! THIS IS THE PERFECT SUSPENSION FOR YOU "SHOOT-OUT" RACERS THAT HAVE BIG HORSE POWER WITH THOSE SKINNY 10" TIRES!!
NO OTHER SUSPENSION "HITS" LIKE THIS ONE!!

If you want the adjustability of an all out
drag car, but you don't want to cut up the
car, this is the suspension for you. It's
fully adjustable! Each suspension tube
has right and left threads so you can
adjust the pinion angle and preload
without removing the links. The instant
center can be adjusted just like a drag
4-link car, so you can make the tires
"hit" as hard as needed. This baby
HOOKS!! Bolts into stock position
utilizing stock shocks and springs,
making this a truly economical set-up!!
Just ream out the control arm bracket
holes to 5/8" and everything
bolts right up! Comes with Moser racing
axles, bearing, studs, and retainers.

NOTE: WHEN ORDERING, PLEASE SPECIFY
EXACT YEAR OF YOUR PRIZED VEHICLE!!
***
(shown above)
"HI-TRAC 9" package
'66-'72 Chevelle
**
(shown below)
'78-'87 GM Monte Carlo
(housing w/brace option)










***
MUST SPECIFY YEAR!
***
STANDARD KIT INCLUDES:
A new massive and thicker aftermarket 9" Ford Housing, 3 1/4" x 1/4" DOM steel axle tubes, Moser race axles..up to 35 spline..(40 available), 3" axle studs, bearings and retainers, and all 4-link parts and hardware.
**

** 64-72 CHEVELLE CUTLASS GTO
Part#1470...$1644.00
**
** 73-77 MALIBU, MONTE CARLO, CUTLASS
Part#1471...$1644.00
**
** 78-87 MONTE CARLO, CUTLASS, GRAND
NATIONAL, MALIBU
Part#1472...$1644.00
***
*STANDARD PACKAGE*
(includes)
HOUSING,LINKS, ROD ENDS,
BOLTS AND SPACERS
Part#1469.......$1234.00
(for above)

'82 to '93 Camaro



'94 to '97 Camaro
and
'98 to '02
ALREADY DEVELOPED !!
WILL BE LISTED SOON!








If you want the ultimate in susp. and
traction control, this is the setup
for you. Features new heavy-duty trans-crossmember and will accept early
model transmissions. Heavy-duty
torque arm won't bend and twist
like a stock unit and this creates
better traction control. Two rod
ends at the back of torque arm make
this setup fully adjustable.





** Housing & axle, bearings, studs,
retainer pkg
Part#1475.......$1169.95
**
** New adjustable torque arm
Part#1476.......$437.95
**
** New adjustable transmission
crossmember
Part#1477.......$159.95
**
** Adjustable track locator
Part#1478.......$102.95
**
** New third mount
Part#1479...$159.00 (shown below)
(TORQUE ARM MOUNT)







NOTE: Third mount enables you to
use your existing torque arm. Also
makes your existing torque
arm fully adjustable.
**

** New Track Locator
Conversion Kit
Part#1480...$56.95
**

NOTE: Track locator kit allows you to turn your
existing track bar into an adjustable one so
you can adjust the rear and put it
exactly on center.
***


!! WE ALSO HAVE TWO KITS FOR '82-'93 !!
**

** 82-'93 CAMARO, TRANS-AM
(COMES WITH TORQUE ARM MOUNT)
Part#1481...$1260.00
(discounted)
***
** 82-'93 CAMARO NEW FULLY ADJUSTABLE
SUSPENSION/REAR PKG
Part#1482...$1714.00

All GM "BOLT-IN" replacement housings
feature: a New massive and thicker
aftermarket 9" Ford housing, the
stronger 3 1/4" x 1/4" DOM steel
axle tubes, special fixture welded,
with all brackets and special
polyurethane bushings on top.
Comes with Moser race axles, bearings, studs,
and retainers.




NOTE: PLEASE SPECIFY EXACT YEAR OF THE
VEHICLE WHEN ORDERING!! THANK YOU.
**

** 64-66 CHEVELLE, CUTLASS,
GTO HOUSING
Part#1490......$739.95
**
H&A PKG
Part#1491.......1169.95
**
** 67-72 CHEVELLE CUTLASS
HOUSING
Part#1492.......$739.95
**
H&A PKG
Part#1493.......$1169.95
**
** 73-77 MALIBU MONTE CARLO
HOUSING
Part#1494.......$739.95
**
H&A PKG
Part#1495.......$1169.95
**
** 78-87 MALIBU MONTE CARLO
HOUSING
Part#1496.......$739.95
**
H&A PKG
Part#1497.......$1169.95
**








64-72 CHEVELLE






78-87 MONTE CARLO

***
VEGA "4-BAR style" ONLY!
***
THE HOUSING AND AXLE
COMBO FEATURES: A NEW
MASSIVE AND THICK AFTERMARKET
9" FORD FIXTURE WELDED
HOUSING, THE STRONGER
3 1/4" X 1/4" DOM STEEL AXLE
TUBES, MOSER RACE AXLES,
BEARINGS, STUDS, &
RETAINERS. ANY SPLINE
UP TO 35, AND SET UP
FOR ANY BRAKE SYSTEM.
**


** HOUSING ONLY
Part#1503.......$809.95
**
** HOUSING & AXLE PACKAGE
Part#1504.......$1174.95





****
**NEW**
MONZA / VEGA TORQUE ARM
BOLT-IN 9" FORD REAR
W/Adjustable Torque Arm Mount
















**
Monza/Vega Housing ,Axles,
BSR pkg and 3rd mount
Combo..$1503.95
Housing only..$949.95
3rd Mount(adj)..$185.00
***
Made with heavy duty in mind
like all our rears. Up to
35 spline axles same price.
Bearings, studs and retainers
come with the Moser axles.
___

Sorry no Tubular Torque Arm
available as of yet
***

GM ADJUSTABLE UPPER CONTROL ARMS
________________________________


-USED WHEN ADJUSTING PINION
AND CHASSIS PRELOAD. WHY
PURCHASE NON-ADJUSTABLE
CONTROL ARMS, WHEN YOU
CAN HAVE THE FULLY ADJ.
TYPE FOR THE SAME PRICE?!
THIS INCLUDES ALL
NECESSARY HARDWARE.**


** 64-67 CHEVELLE,GTO,CUTLASS
Part#1510.......$185.50
**

** 68-72 CHEVELLE,GTO,CUTLASS
Part#1511.......$185.50
**

** 73-77 MONTE CARLO,
CUTLASS,MALIBU
Part#1512.......$185.50
**

** 78-87 MONTE CARLO,
CUTLASS,GRAND NATIONAL
Part#1513.......$185.50

GM ADJUSTABLE LOWER CONTROL ARMS
_______________________________


-USED WHEN ADJUSTING PINION
AND CHASSIS PRELOAD. COMPLETE
WITH ALL NECESSARY HARDWARE.
DUE TO DIFFERENT LENGTHS
MADE FOR GM CARS, YOU MAY
HAVE TO PROVIDE THE HOLE-
TO-HOLE DIMENSIONS FOR THE
BEST POSSIBLE ACCURACY.
**


** 64-67 CHEVELLE,
GTO,CUTLASS
Part#1514.......$308.95
**

** 69-72 CHEVELLE,
GTO,CUTLASS
Part#1516.......$308.95
**

** 73-77 MONTE CARLO,
CUTLASS,MALIBU
Part#1517.......$308.95
**

** 78-87 MONTE CARLO, CUTLASS,
GRAND NATIONAL
Part#1518.......$308.95

***
Standard units come with the poly type rod ends. CHROMOLY rod ends are available for additional price.

New adjustable control arms to convert an
early 68-72 12-bolt coil spring rear to the
later 78-87 GM cars with a special offset
design. Kit includes upper control arms
and new coil spring mounts.
THE PERFECT CONVERSION!!







** Part#1519...ONLY...$205.95

All the features and benefits of our other
9" Ford rears....A New massive and thick aftermarket 9" Ford housing, The stronger
3 1/4" x 1/4" DOM steel axle tubing
built specifically for the
vehicles listed below. Includes leaf spring
pads already welded in place. Housing pkg.
includes: jig welded housing only. Housing
and axles packages include: jig welded
housing, plus you get Moser race axles,
bearings, 1/2"x3 axle studs, and retainers.

!! OTHERS TYPES AVAILABLE
FOR MOPARS & FORDS.

** 66-67 NOVA HOUSING
Part#1525.......$719.00
**
** 66-67 NOVA H&A PKG
Part#1526.......$1144.00
**
** 67-69 CAMARO HOUSING
Part#1527.......$719.00
**
** 67-69 CAMARO H&A PKG
Part#1528.......$1144.00
**
** 70-81 CAMARO HOUSING
Part#1529.......$719.00
**
** 70-81 CAMARO H&A PKG
Part#1530.......$1144.00
**
** S-10 HOUSING
Part#1531.......$669.00
**
** S-10 H&A PKG
Part#1532.......$1105.00
**
** 65-66 MUSTANG HOUSING
Part#1533.......669.00
**
** 65-66 MUSTANG H&A PKG
Part#1534.......$1105.00
**
** 67-70 MUSTANG HOUSING
Part#1535.......$669.00
**
** 67-70 MUSTANG H&A PKG
Part#1536.......1105.00